Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Defence
  • /
  • F-35 airframe begins third phase of structural testing

Defence

F-35 airframe begins third phase of structural testing

A third phase of durability testing on an F-35 Lightning II airframe is due to begin at BAE Systems' Military Air & Information site in Brough, East Yorkshire.

Each phase of testing, lasting a total of 8,000 hours, is equivalent to an entire lifetime of the airframe once it enters service. Two complete ‘lifetimes’ of the airframe – equivalent to 16,000 hours - have already been completed on a Conventional Take-Off and Landing (CTOL) variant airframe at the Company’s structural test facility and the third set of tests will commence in early 2016. These tests prove the airframe will be able to safely handle a variety of flying conditions it could experience when in service.

Advertisement
ODU RT 2

The 350-tonne airframe structural test rig at the Brough site was built to ‘fly’ the F-35 Lightning II through a series of flight scenarios. More than 20 miles of wiring, 2,500 strain gauges and 160 loading actuators are designed to subject the aircraft to a range of loads that it could typically encounter in actual flight. 
 
Andy Prendergast, Operations Manager for Structural and Dynamic Test, BAE Systems, said: “Reaching two complete lifetimes of testing is an important milestone for our structural test facility at Brough, and demonstrates the proven endurance of the F-35 airframe. We have pushed the testing to the limits, ensuring that the F-35 Lightning II aircraft will fly safely and effectively throughout its lifetime of service. We will further qualify this by starting a third lifetime of testing.”
 
The structural test team at Brough are experts in their field having rigorously tested a dozen different aircraft types since the 1970s, including Buccaneer, Harrier, Tornado, Hawk and Eurofighter Typhoon.

Advertisement
ODU RT 2

Last year, three lifetimes of testing – the equivalent of 24,000 hours of flight – took place on the vertical tails of the F-35 Conventional Take Off and Landing (CTOL) and Short Take Off and Vertical Landing (STOVL) variants at Brough. The structural test facilities for the vertical tails, made up of a vertical tail manoeuvre rig and a vertical tail buffet rig, are both designed to simulate the loads that the component would undergo during actual flight. 

Advertisement
Advanced Navigation LB 1
NP Aerospace extends Ukraine support with Norway contract

Defence

NP Aerospace extends Ukraine support with Norway contract

24 April 2024

NP Aerospace is continuing its support for Ukraine with the delivery of a further 2,000 sets of body armour and carrier vests via Norway and the UK Ministry of Defence.

PA Consulting launches Secure Futures report

Defence Security Space

PA Consulting launches Secure Futures report

24 April 2024

PA Consulting has announced the launch of its Secure Futures report, part of its Secure Futures series providing insights and events emphasising the importance of collaboration in delivering a secure future.

DASA seeks novel testing and evaluation for defence

Defence

DASA seeks novel testing and evaluation for defence

24 April 2024

The Defence and Security Accelerator (DASA) has launched a new Innovation Focus Area (IFA) called Unlocking the True Potential of Test and Evaluation for Defence, run on behalf of the Ministry of Defence (MoD).

UK set to increase defence spending to 2.5% by 2030

Defence

UK set to increase defence spending to 2.5% by 2030

24 April 2024

Prime Minister Rishi Sunak has announced that the UK will increase defence spending to 2.5% by 2030.

Advertisement
ODU RT
BMT partners with DNV to advance Australian Landing Craft design

Defence

BMT partners with DNV to advance Australian Landing Craft design

24 April 2024

BMT has signed a Memorandum of Understanding (MoU) with classification society DNV, primarily aimed at advancing BMT’s development of an Australian version of its CAIMEN Large Design for the future Landing Craft – Heavy (LC-H) programme, for the Australian Army.

BMT SPARO project secures British Army funding

Defence

BMT SPARO project secures British Army funding

23 April 2024

In a major development for the BMT SPARO project, the British Army’s Futures Directorate has provided funding to build, supply and demonstrate the latest prototype for UK medics who took part in Project CONVERGENCE, the premier US Army experimentation exercise in March.

Advertisement
ODU RT 2