in Space

BepiColombo launches on Ariane 5 from Kourou

Posted 20 October 2018 · Add Comment

The European-Japanese BepiColombo mission to Mercury was successfully launched this morning, Saturday 20 October, at 03:45 am (CET) from the spaceport in Kourou (French Guiana) on an Ariane 5 launcher.


Copyright Airbus

 
The satellite built by Airbus for the European Space Agency (ESA) and Japanese Space Agency (JAXA) is now embarking on its long journey of some 8.5 billion kilometres through the inner solar system, reaching our solar system’s innermost planet in seven years.
 
After arrival in 2025, for the first time two space probes will simultaneously observe Mercury and its environment. Plans include using cameras to map the planet’s surface more precisely than ever before. Data collected from 16 scientific instruments will provide insights into the geological and chemical composition of the planet, along with its structure, the characteristics of its magnetic field and how it interacts with the solar wind.
 
“This very complex mission is the result of a truly inspiring international cooperation among 83 companies from 16 European countries and Japan”, said Nicolas Chamussy, Head of Space Systems.

“This international effort, with Airbus teams from five countries, is the natural consequence of humanity's desire to discover more about this little known planet and the origins of our solar system. All great missions come with challenges: Airbus had to develop sophisticated thermal control solutions and even “special” solar arrays, capable of tilting 75 degrees away from the Sun to limit the temperature. Now its challenge is to complete the journey safely and deliver the science we're all waiting for."
 
The Ariane 5 launched ‘Bepi’ into space at ‘escape velocity’ – the speed required for an object to break free of the Earth’s gravitational pull. This will allow the space probe to enter a solar orbit similar to that of the Earth at speeds of around 120,000 km/h. During its journey to Mercury, BepiColombo will make several braking manoeuvres to adjust its orbit, allowing it to make a slow approach towards the planet.
 
In order to achieve this, the control centre – the European Space Operations Centre (ESOC) in Darmstadt, Germany – has plotted a sophisticated course through the inner solar system. It will apply the brakes just 60 days into the journey to reduce Bepi’s speed: an electric propulsion system and a total of nine planetary swing-bys (one of the Earth in April 2020, two of Venus and six of Mercury) will provide BepiColombo with the energy it requires. A maximum of two of the four xenon-propelled ion thrusters will be employed at any one time during the long journey; these will be used on more than 700 days in total, up to four months of which without interruption. The thrusters will be powered by two 1.8 x 14-metre solar arrays. The ion thrusters, a further chemical propulsion system and the solar arrays are located on the Mercury Transfer Module (MTM), the propulsion module for the interplanetary voyage to Mercury.
 
With the journey totalling some 8.5 billion kilometres – the equivalent of travelling from the Earth to Neptune and back again – Bepi will actually travel 38 times the maximum distance between the Earth and Mercury. After travelling for seven years and completing 18 orbits around the Sun, the MTM will be jettisoned in 2025. From that point onwards, the orbiters will power themselves using solar energy and their own propulsion system. The space probe will then swing into orbit around Mercury before each orbiter enters its own orbit and begins the actual scientific exploration of the planet.


 

* required field

Post a comment

Other Stories
Advertisement
Latest News

USAF Academy selects Merlin flight simulators

The USAF Academy, Colorado, have ordered four new simulators for their teaching facility from the Merlin Flight Simulation Group in the UK.

BA increases winter frequency between Scotland and Heathrow

British Airways is to increase its winter schedule between Scotland and London’s Heathrow Airport, operating almost 200 flights a week from October 2019 to March next year.

Meggitt signs agreements with Air Support SA and Ateliers Bigata SAS

Components and sub-systems supplier for aerospace, defence and energy markets, Meggitt plc, has signed with Air Support SA an MRO for aerospace and engine components for the maintenance of high pressure engine control valves and

US President protected by RDS

US President Donald Trump slept secure behind a ring of steel on his recent State visit to the United Kingdom – thanks to a premier British fencing systems manufacturer.

DASA competition to stop tanks enters second phase

The Defence and Security Accelerator (DASA) competition which seeks proposals for novel approaches to stopping or impeding tanks and other heavy armoured vehicles, while preventing or minimising collateral damage, is entering its

Construction begins on accommodation for Royal Marines

Construction has begun on new accommodation for personnel at the Commando Training Centre Royal Marines (CTCRM), at Lympstone in Devon.

See us at
ADSS1000DBT1706171019VIDSE BT1605060320SMI FAV BT1006141119SMI GMS BT1906071119DSEI JP BT1605201119SMI ActiveP BT1206121119