Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Aerospace
  • /
  • IATA releases 2018 Airline Safety Performance data

Aerospace

IATA releases 2018 Airline Safety Performance data

The International Air Transport Association (IATA) released data for the 2018 safety performance of the commercial airline industry showing continuing safety improvements over the long term but an increase in accidents compared to 2017.

The all accident rate (measured in accidents per one million flights) was 1.35, which was the equivalent of one accident for every 740,000 flights. This was an improvement over the all accident rate of 1.79 for the previous five-year period (2013-2017), but a decline compared to 2017’s record performance of 1.11.

Advertisement
Advanced Engineering RT
  • The 2018 rate for major jet accidents (measured in jet hull losses per 1 million flights) was 0.19, which was the equivalent of one major accident for every 5.4 million flights. This was an improvement over the rate for the previous five-year period (2013-2017) of 0.29 but not as good as the rate of 0.12 in 2017.
  • There were 11 fatal accidents with 523 fatalities among passengers and crew. This compares with an average of 8.8 fatal accidents and approximately 234 fatalities per year in the previous five-year period (2013-2017). In 2017, the industry experienced six fatal accidents with 19 fatalities, which was a record low. One accident in 2017 also resulted in the deaths of 35 persons on the ground.

“Last year some 4.3 billion passengers flew safely on 46.1 million flights. 2018 was not the extraordinary year that 2017 was. However, flying is safe, and the data tell us that it is getting safer. For example, if safety in 2018 had remained at the same level as 2013, there would have been 109 accidents instead of 62; and there would have been 18 fatal accidents, instead of the 11 that actually occurred.” said Alexandre de Juniac, IATA’s Director General and CEO.

“Flying continues to be the safest form of long distance travel the world has ever known. Based on the data, on average, a passenger could take a flight every day for 241 years before experiencing an accident with one fatality on board. We remain committed to the goal of having every flight takeoff and land safely,” said de Juniac.


Click here for enlarged view

Jet hull loss rates by region of operator (per million departures)
Six regions showed improvement or stayed the same in 2018 compared to the previous five years (2013-2017) in terms of the jet hull loss rate.

Turboprop hull loss rates by region of operator (per million departures)
The world turboprop hull loss rate was 0.60 per million flights, which was an improvement over 1.23 in 2017 and also over the five-year rate (2013-2017) of 1.83. All regions except for Middle East-North Africa saw their turboprop safety performance improve in 2018 when compared to their respective five-year rates. Accidents involving turboprop aircraft represented 24% of all accidents in 2018 and 45% of fatal accidents.

Advertisement
Marshall RT 2

Progress in Africa
For a third consecutive year, airlines in Sub-Saharan Africa experienced zero jet hull losses and zero fatalities in jet operations. The all accident rate was 2.71, a significant improvement over the rate of 6.80 for the previous five years. Africa was the only region to see a decline in the all-accident rate compared to 2017. However, the region experienced two fatal turboprop accidents, neither of which involved a scheduled passenger flight.

“We continue to progress in the region toward world-class levels of safety. But, despite improvement there is still a gap to cover in the safety performance of the continent’s turboprop fleet. Global standards such as the IATA Operational Safety Audit (IOSA) are making a difference. Counting all accidents, the performance of African airlines on the IOSA registry was more than twice as good as non-IOSA airlines in the region.

“In parallel, African governments must accelerate the implementation of ICAO’s safety-related standards and recommended practices (SARPS). As of year-end 2017, only 26 African countries had at least 60% SARPS implementation. They also should incorporate IOSA into their safety oversight systems,” said de Juniac.

In 2018, the all accident rate for airlines on the IOSA registry was more than two times lower than that of non-IOSA airlines (0.98 vs. 2.16) and it was more than two-and-a-half times better over the 2014-18 period. All IATA member airlines are required to maintain their IOSA registration.

IOSA
However, 2018 IOSA calculations are impacted by the fatal accident involving a Global Air aircraft that was leased, along with crew, to Cubana. Because Global Air is not on the IOSA registry, the accident is not considered to have involved an IOSA airline, even though Cubana, as a member of IATA, is required to be on the IOSA registry.

There are currently 431 airlines on the IOSA Registry of which 131 are non-IATA Members. The IOSA program is undergoing a digital transformation that will enable IOSA airlines to compare and benchmark their performance. In the long run, the digital transformation will help to focus auditing on areas with the highest level of safety risk.

GADM
IATA’s Global Aviation Data Management (GADM) programme is the world’s most diverse aviation data exchange programme. Data captured in GADM databases comprises accident and incident reports, ground damage occurrences and flight data from more than 470 different industry participants. “Through GADM, we are using information from the more than 100,000 flights that operate safely every day to identify and address operational issues before they can become potential risks,” said de Juniac.

The Flight Data Exchange (FDX) platform contains de-identified information from four million flights. Additionally, with the imminent introduction of Incident Data Exchange (IDX), participants will be provided with enhanced data analytics and benchmarking capabilities with aggregated de-identified global safety data. IATA has also been working with more than 100 aviation safety professionals on the IATA Safety Incident Taxonomy (ISIT). The ISIT will provide the ability to better capture global risk at a more granular level.

One well-known hazard is inflight turbulence. As passenger and cabin crew injuries related to in-flight turbulence climb, IATA sees a need to address this increasing safety risk. In response, IATA has launched Turbulence Aware, a global platform for sharing automated turbulence reports in real time. Operational trials with a number of airlines are being conducted this year, with full launch planned for 2020.

Advertisement
General Atomics LB General Atomics LB
Roke opens Gloucester office

Aerospace Defence Security

Roke opens Gloucester office

19 April 2024

Romsey headquartered technology company Roke, has today officially opened its new bespoke office space in Gloucester, as it focuses on further expansion, innovation and technological growth in the area and for the UK.

EDGE secures project management contracts at Leeds Bradford and Luton airports

Aerospace

EDGE secures project management contracts at Leeds Bradford and Luton airports

19 April 2024

Multidisciplinary property and construction consultancy EDGE has secured a new project for Leeds Bradford Airport (LBA) and the re-appointment to London Luton Airport’s (LLA) project management framework.

First disability flying lessons launched from Kent airport

Aerospace

First disability flying lessons launched from Kent airport

19 April 2024

The UK’s disabled flying charity Aerobility has partnered with Lydd Aero Club in Kent to provide opportunities for lessons and experience flights for people living with disabilities.

Crestline invests in 2Excel

Aerospace

Crestline invests in 2Excel

18 April 2024

Aviation and engineering company 2Excel Group has completed a growth capital and refinancing transaction with the backing of new capital partner Crestline, to pursue its ambitious growth strategy.

Advertisement
Advanced Engineering RT
Skyports secures investment from ACS Group

Aerospace

Skyports secures investment from ACS Group

18 April 2024

Skyports has announced that infrastructure and construction company ACS Group, has made a substantial equity investment in Skyports, to become the largest investor in the company.

SDE Technology leads development of superplastic forming process

Aerospace

SDE Technology leads development of superplastic forming process

18 April 2024

Shropshire-based lightweight engineering SME, SDE Technology, is leading an initiative to develop a new superplastic forming process, with the new hybrid manufacturing method potentially boosting manufacturing efficiency and capability in the UK for key aerospace components, that global manufacturers' use in aircraft production.

Advertisement
Marshall RT 2