in Space

BepiColombo readied for launch to Mercury

Posted 2 October 2018 · Add Comment

The BepiColombo joint mission of the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) - with the space probe constituting a 6.4-metre stacked spacecraft assembly incorporating a four-in-one satellite and a wealth of British expertise - is being readied to embark later this month on a seven years journey to conduct Europe’s first mission to Mercury.



BepiColombo is currently being readied at the European Spaceport Kourou (French Guiana) for launch. It was built under the industrial leadership of Airbus, leading a consortium of 83 companies from 16 countries, for the European Space Agency (ESA) and Japanese Space Agency (JAXA). The four-in-one spacecraft will set off in October on-board Ariane 5 flight VA 245 for its journey to the smallest and least explored rocky planet in our Solar System. The 6.4-metre stacked satellite assembly will be injected into a direct Earth escape trajectory to start its seven years journey towards Mercury.

The mission will also be a European ‘first’, using a multiple ion engine propulsion module for interplanetary transfer, with four electric propulsion thrusters provided by the QinetiQ Ion Thruster team. To reach Mercury requires an extremely high velocity change, which can be achieved by ion thrusters with modest propellant quantities, compared to traditional chemical thrusters. The engines are based on the T6 ion thruster model, a development from the smaller T5 used by ESA on the successful GOCE mission. These thrusters are more effective for the BepiColombo mission than the alternative Hall and chemical technologies. Also, the two science orbiters of the BepiColombo mission carrying the Mercury Imaging X-ray Spectrometer (MIXS) were developed by the University of Leicester.
 
Power sources for BepiColombo will be the gravity of Earth, Venus and Mercury in combination with the thrust provided by solar-electric propulsion (SEP). During the voyage to Mercury, two orbiters, a transfer module, consisting of electric propulsion and traditional chemical thruster units and a sun-shield, will form one single composite spacecraft. When it arrives at Mercury in late 2025, the transfer module will separate the two science orbiters. They will endure temperatures in excess of 350°C and gather data during its one year nominal mission, with a possible one-year extension.
 
While final launch preparation activities are ongoing in Kourou, Airbus team members are heavily involved in the LEOP (Launch and Early Orbit Phase) simulation campaign at the European Space Operations Centre (ESOC) in Darmstadt (Germany). A dedicated Project Support Team will be present in ESOC at launch to support the first 'steps' of BepiColombo.
 
The Sun’s glare makes it impossible to study Mercury in detail using telescopes and the extreme heat and proximity to the Sun make it hard to reach. So far, only two NASA missions have visited Mercury: Mariner 10 in the 1970’s and Messenger, which orbited the planet from 2011 until it ran out of fuel in April 2015.
 
ESA and JAXA have teamed up for the mission BepiColombo. It is made up of two separate orbiters, the Mercury Planetary Orbiter (MPO supplied by ESA) and the Mercury Magnetospheric Orbiter (MMO supplied by JAXA).
 
The BepiColombo mission, named after the Italian professor Giuseppe ‘Bepi’ Colombo, who was instrumental in making the Mariner 10 mission such a success, will examine the peculiarities of Mercury´s internal structure and magnetic field generation and how it interacts with the Sun and solar wind. It will investigate surface features and chemistry, such as the ice in permanently shadowed craters at the poles. The mission's science will significantly improve our understanding of the formation of our Solar System, and the evolution of planets close to their parent stars.

 

 

* required field

Post a comment

Other Stories
Advertisement
Latest News

USAF Academy selects Merlin flight simulators

The USAF Academy, Colorado, have ordered four new simulators for their teaching facility from the Merlin Flight Simulation Group in the UK.

BA increases winter frequency between Scotland and Heathrow

British Airways is to increase its winter schedule between Scotland and London’s Heathrow Airport, operating almost 200 flights a week from October 2019 to March next year.

Meggitt signs agreements with Air Support SA and Ateliers Bigata SAS

Components and sub-systems supplier for aerospace, defence and energy markets, Meggitt plc, has signed with Air Support SA an MRO for aerospace and engine components for the maintenance of high pressure engine control valves and

US President protected by RDS

US President Donald Trump slept secure behind a ring of steel on his recent State visit to the United Kingdom – thanks to a premier British fencing systems manufacturer.

DASA competition to stop tanks enters second phase

The Defence and Security Accelerator (DASA) competition which seeks proposals for novel approaches to stopping or impeding tanks and other heavy armoured vehicles, while preventing or minimising collateral damage, is entering its

Construction begins on accommodation for Royal Marines

Construction has begun on new accommodation for personnel at the Commando Training Centre Royal Marines (CTCRM), at Lympstone in Devon.

ODU 0201311219
See us at
SMI ActiveP BT1206121119ADSS1000DBT1706171019VIDSE BT1605060320SMI FAV BT1006141119DSEI JP BT1605201119SMI GMS BT1906071119