Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide

Aerospace

Cranfield calculates impact of drone noise

Measurement trials with unmanned aerial vehicles (UAVs) at Cranfield University are paving the way for a better understanding of the noise impact of drones.

Image courtesy Cranfield

UAV noise is a concern often raised for flights over urban areas, encompassing not only noise volume but also frequency of sound from flights. A recent report by the UK Regulatory Horizons Council acknowledged that drones may be unpopular in residential settings due to their noise and this might be a growing issue as the use of drones for inspections and deliveries increases.

Advertisement
DSEI 2025

The Department for Transport (DfT) and Civil Aviation Authority (CAA) are constantly reviewing drone noise but there is a lack of high-quality data to guide future regulation. Currently there is no noise standard for UAVs within the UK. The learning from these trials hopes to inform the methods required to meaningfully measure and understand UAV noise.

A research event hosted at Cranfield Airport – in partnership with noise specialists Envirosuite and drone industry group ARPAS-UK, and observed by the CAA and Cranfield environmental noise experts – confirmed that microphones can effectively capture UAV noise levels at different altitudes and that noise spectra can be used to identify types of UAV.

The measurement trials involved commercially-available small to medium size multi-rotor UAVs flying a variety of defined and representative flight paths at Cranfield’s global research airport. Ground measurements were made using Envirosuite’s bespoke noise measurement equipment.

Maximum noise levels recorded from different UAVs flying at altitudes of 100 feet and above were typically in the range 50 to 60 decibels (dBA), similar to the sound levels that would normally be heard in an office or restaurant.

Professor Iain Gray, Director of Aerospace at Cranfield University and Chair of the Drone Industry Action Groupsaid: “This preliminary work is important in starting to inform our understanding of the impact of drone noise levels. What’s key now is that further detailed work takes place, building a more complete picture to inform future operational practices for the industry.”

Increasing understanding of noise impact
Dr Karthik Depuru Mohan, Research Fellow in Aeromechanical Systems, Cranfield University, said: “As our skies become busier with UAVs, it is important to understand the noise impact they may have on the populations below them and the relationship between fight paths and noise spectra. A comprehensive study with a wider range of UAV types, flight paths and manoeuvres can help to establish UAV noise standards.”

Along with absolute noise levels, the type of noises generated by drones is also a subject for research. Certain noises – such as the ‘buzzing’ sound of some drones – may be considered more annoying or disturbing than others. As drones land or take off their noise levels may also change, and this may have an impact on those living in the immediate area.  

Dr Simon Jude, Senior Lecturer in Environmental Decision Making in the Centre for Environmental and Agricultural Informatics and leading Cranfield’s Urban Observatory project, said: “This research highlights the urgent need for further work to investigate public understanding, perceptions and acceptability of UAV noise. Knowledge and attitudes towards drones vary across society and public concerns and perceptions could be a barrier to adoption if not addressed.”

Advertisement
ODU RT

Graham Brown, CEO – ARPAS-UK, said: “Having initiated the activity in conversations with Cranfield, we are very pleased that this exercise was carried out with the right team in place. ARPAS members were involved with the flying so thanks to those who made themselves available. This is all about making sure the right data is available to guide decisions and we look forward to being involved as the activity continues.”

Peter Rafano, Envirosuite, said: “The urban soundscape over the coming decade will change with the implementation of drones, undertaking everything from deliveries of goods to households, through to urgent medical supplies to hospitals. Envirosuite welcomes the opportunity to use our accurate, yet easy to use EVS Omnis noise monitoring technology to allow these trials to go ahead and the data to be shared and analysed. The results will help shape for the better the urban soundscape we all live in.”

Further trials are now planned to gather more data so that a comprehensive analysis can be undertaken by Cranfield’s specialist teams and the potential societal impact of such noise better understood.

 


 

Advertisement
Babcock LB
Vietjet orders 20 more A330-900s

Aerospace

Vietjet orders 20 more A330-900s

27 May 2025

Vietjet, Vietnam’s largest private airline, has placed a new order with Airbus for 20 widebody A330-900 aircraft to support strategic expansion over the next decade.

Marshall appoints Andrew Auker-Howlett as Head of Manufacturing Support

Aerospace Defence

Marshall appoints Andrew Auker-Howlett as Head of Manufacturing Support

23 May 2025

Marshall has appointed Andrew Auker-Howlett as Head of Manufacturing Support, a key role underpinning the company’s maintenance, repair, overhaul and engineering activities.

Manchester Airport opens T2 security hall

Aerospace Security

Manchester Airport opens T2 security hall

23 May 2025

Manchester Airport has opened its new Terminal 2 security hall, a major milestone as the 10-year, £1.3 billion transformation of Manchester Airport nears completion.

East Midlands Airport unveils cargo hub plans

Aerospace

East Midlands Airport unveils cargo hub plans

22 May 2025

East Midlands Airport unveiled plans that could create more than 20,000 jobs by making land around its runway available for development.

Advertisement
ODU RT
Babcock’s Festival of Engineering in Fife inspires new talent

Aerospace Defence Space Events

Babcock’s Festival of Engineering in Fife inspires new talent

21 May 2025

A journey through space was just one of a number of fantastic opportunities available at Babcock's Rosyth facility this week as the defence company rocketed 300 school pupils’ ambitions at the company’s annual Festival of Engineering.

ZeroAvia to build manufacturing hub in Scotland

Aerospace

ZeroAvia to build manufacturing hub in Scotland

21 May 2025

ZeroAvia announced today that it will build a major manufacturing facility for production of its hydrogen-electric powertrains at the Advanced Manufacturing Innovation District Scotland, close to Glasgow Airport in Renfrewshire.

Advertisement
DSEI 2025