Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Defence
  • /
  • GA-ASI Completes Full-Scale Fatigue Test on MQ-9B for Second Lifetime

Defence

GA-ASI Completes Full-Scale Fatigue Test on MQ-9B for Second Lifetime

General Atomics Aeronautical Systems, Inc completed a major milestone with the full-scale fatigue testing of an MQ-9B Remotely Piloted Aircraft (RPA).


Image courtesy General Atomics Aeronautical Systems, Inc.

The team completed the “second lifetime” of fatigue testing, which is equivalent to 80,000 operating hours and represents an important step in validating the design of the airframe system. The testing is part of the aircraft certification to NATO standard STANAG 4671, where the aircraft will ultimately be tested through three lifetimes, thereby proving the 40,000-hour lifetime of the airframe. 

Advertisement
ODU RT

The full-scale fatigue test simulates the aircraft’s design service through the application of repeated structural loading on the assembled airframe. The testing identifies any potential structural deficiencies ahead of fleet usage and assists in developing inspection and maintenance schedules for the airframe. The results of the test will be used as part of the documentation for certification and will form the basis for in-service inspections of structural components.

MQ-9B is GA-ASI’s most advanced RPA and includes the SkyGuardian® and SeaGuardian® models as well as the new Protector RG Mk1 that is currently being delivered to the United Kingdom Royal Air Force (RAF).

“Full-scale fatigue testing is an integral part of validating the airframe design and a key input for the certification of the airframe prior to entering service,” said Chris Dusseault, vice president of MQ-9B in Europe. “The completion of the fatigue test builds confidence for our MQ-9B customers that the SkyGuardian/SeaGuardian meets the stringent design rigor and is mature at Entry into Service.”

Advertisement
ODU RT

The testing is the validation of years of design and analysis efforts. This is the second of three lifetimes of testing for the airframe. Two of the lifetimes simulate the operation of an aircraft under normal conditions, and the third has intentional damage inflicted on the airframe’s critical components to demonstrate its resistance to operational damage that may occur over the lifetime of the air vehicle.

Testing was conducted from Jan. 31, 2024, through Sept. 30, 2024, at Wichita State University’s National Institute for Aviation Research in Wichita, Kansas. The airframe tested is a production airframe purpose-built to support the test campaign.

In addition to the RAF, contracts have been signed for MQ-9B with Belgium, Canada, Japan, Taiwan and the U.S. Air Force in support of the Special Operations Command. The Japan Coast Guard is currently operating the SeaGuardian for maritime operations, and the Japan Maritime Self-Defense Force (JMSDF) selected SeaGuardian for its Medium-Altitude, Long-Endurance (MALE) RPA System Trial Operation Project.

 

Advertisement
Hexagon leaderboard
Galvion invests in Sentinel Photonics to advance laser threat protection

Defence

Galvion invests in Sentinel Photonics to advance laser threat protection

6 May 2026

Galvion has announced a strategic investment in Sentinel Photonics to accelerate the deployment of advanced frontline laser detection and protection technologies to allied forces.

Saab UK opens Fareham I&V testing facility

Defence

Saab UK opens Fareham I&V testing facility

6 May 2026

Saab UK has opened a new Integration & Verification (I&V) testing facility on-site in Fareham as part of its Sensor Systems business, as it also completes its 100th Giraffe 1X radar system.

Dstl hones its AIM

Defence

Dstl hones its AIM

6 May 2026

The Defence Science and Technology Laboratory (Dstl) has developed AIM – Assured Intent Messaging – a new system designed to help commanders better coordinate surveillance, targeting and weapons across a wide range of platforms, from uncrewed systems to missiles.

Cross Manufacturing expands AS9100 Certification across all its sites

Aerospace Defence

Cross Manufacturing expands AS9100 Certification across all its sites

6 May 2026

Cross Manufacturing has announced that its Devizes North site has successfully achieved AS9100 certification, completing a key stage of the company’s strategic expansion to support customers in the aerospace and defence sectors.

Advertisement
ODU RT
Jergens enhances Martin-Baker Aircraft ejection seat release

Defence

Jergens enhances Martin-Baker Aircraft ejection seat release

5 May 2026

Jergens has worked in collaboration with Martin-Baker Aircraft Co. to support the integration of precision quick-release pin solutions within ejector seat assemblies.

EDM opens new facility in Malaysia

Aerospace Defence

EDM opens new facility in Malaysia

5 May 2026

Manchester based EDM Ltd, which designs and manufactures advanced training simulators for the civil aviation and defence sectors, has announced the opening of a new manufacturing facility in Malaysia.

Advertisement
ODU RT
Advertisement
General Atomics LB