Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Defence
  • /
  • Leonardo and UK industry trial new high-tech protection for Armed Forces vehicles

Defence

Leonardo and UK industry trial new high-tech protection for Armed Forces vehicles

Leonardo, leading a cross-UK team of science and technology experts, has successfully trialled a new high-tech protection system approach for Army vehicles such as tanks and armoured personnel carriers.

Above: Panorama view of the Gate House and Clock Tower on the Shoebury Garrison estate, Shoeburyness, Essex (28.08.21).
By Chris Lawrence Travel

Called MIPS (Modular Integration Protection System), the new approach brings together layers of electronic and physical protection technologies to equip vehicle crews with a formidable defensive shield. The team included Abstract Solutions, CGI, Frazer-Nash, Lockheed Martin UK, RBSL, Roke and Ultra Electronics.

Advertisement
ODU RT

The demonstration of the developmental MIPS architecture was a key milestone of project Icarus, a Defence Science and Technology Laboratory (Dstl) technology demonstrator programme (TDP). Dstl launched the programme in response to the increasing prevalence and rapidly evolving threat of battlefield weapon systems such as modern Rocket Propelled Grenades (RPGs) and Anti-Tank Guided Weapons (ATGWs).

During the trial, which took place at the MoD Shoeburyness range in Essex in July, representative weapons were fired from short range at MIPS. The developmental system integrated a combination of commercial off-the-shelf and surrogate sensors and countermeasures that were each adapted to integrate into MIPS. This trial provided a comprehensive test of the ability of the MIPS sense, control and reaction sequence to respond appropriately to threats within extremely short timeframes.

MIPS is based on open-systems and model-driven principles to form the basis of an architectural and infrastructure approach to ground vehicle protection that supports the modular integration, affordable acquisition & safe deployment of ‘best-of-breed’ sensors and countermeasures to deliver UK operational independence. This includes sensors and ‘soft’ protection systems that focus on early threat detection and attempt to disrupt, decoy or spoof the incoming threat and ‘hard’ countermeasure systems to intercept and physically defeat the incoming weapon system, known in military terminology as a ‘kinetic effect’.

The MIPS solution is specifically designed to enable the vehicle’s protection system to be rapidly tailored, evolved and certified to protect crew members as new threats emerge on the battlefield.

As well as establishing, demonstrating and testing the MIPS solution, a through-life capability roadmap and initial approach for acquisition has been produced to help inform UK MoD as it looks to establish a way forward to mature the MIPS capability and bring it into operational service.

Advertisement
ODU RT

Following the successful conclusion of the TDP as originally scoped, contract amendments have been placed to extend the programme to explore the potential application of MIPS to deliver counter-drone and counter-ISTAR capability solutions. Through this additional work, the implications and modifications necessary with respect to the MIPS architecture, system model and draft MIPS Standard to enable this outcome will be established.

 

 

Advertisement
Hexagon leaderboard
QinetiQ supports Typhoon counter drone missile integration

Defence

QinetiQ supports Typhoon counter drone missile integration

17 May 2026

QinetiQ has supported the RAF in rapidly integrating and testing laser guided, low-cost missiles to RAF Typhoons, which are now being used in the Middle East to defend against drone attacks.

Dstl backed robotics advance transforms military manufacturing

Defence

Dstl backed robotics advance transforms military manufacturing

15 May 2026

Rivelin Robotics, supported by Defence Science and Technology Laboratory (Dstl) expertise, has created microfactory technology that automates the slow, risky manual finishing of 3D printed parts.

Defence firms incentivised to deliver on time

Defence

Defence firms incentivised to deliver on time

15 May 2026

The UK Government is cracking down on waste and delays as defence companies are to be incentivised to deliver equipment on time and on budget with new reforms to Single Source Contract Regulations.

MoD selects TEKEVER to support Project NYX

Defence

MoD selects TEKEVER to support Project NYX

15 May 2026

TEKEVER has been selected by the UK Ministry of Defence (MoD) to support Project NYX, the British Army’s programme to develop next-generation autonomous systems capable of operating alongside Apache attack helicopters.

Advertisement
ODU RT
West Midlands launches MoD-backed RDSC

Defence

West Midlands launches MoD-backed RDSC

15 May 2026

A new Regional Defence and Security Cluster (RDSC), designed to align local defence capabilities with UK demand, has been launched in the West Midlands.

Getac to demo integrated tactical solutions at SOF Week 2026

Defence Security Events

Getac to demo integrated tactical solutions at SOF Week 2026

15 May 2026

Getac, a provider of rugged computing and mobile video solutions and a manufacturer with advanced in-house capabilities, will demo its portfolio of rugged laptops, tablets and command solutions at SOF Week 2026, 18th-21st May in Tampa, Florida.

Advertisement
ODU RT
Advertisement
General Atomics LB