Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Aerospace
  • /
  • Samad Aerospace completes first CTOL flight of 50% scale e-Starling

Aerospace

Samad Aerospace completes first CTOL flight of 50% scale e-Starling

Cranfield based UK technology startup, Samad Aerospace, has reached a major milestone with the successful conventional take-off and landing (CTOL) flight test of the company's 50% scale fully electric aircraft, the Starling, moving towards vertical take-off and landing (VTOL).

Samad’s Starling project aims to commercialise the world’s first e-VTOL hybrid aircraft. Samad’s CEO, Dr Seyed Mohammad Mohseni, praised his team’s resilience attributing this latest success last month to their, "striking and unparalleled dedication during unprecedented times". Samad’s Chief Production Officer explained: "We believe passionately in our proven technology, COVID-19 threw a few challenges our way but this passion fuels our determination, securing this success.

Advertisement
Gulfstream RT

"CTOL trials are an essential step towards VTOL aircraft development. Ticking off the CTOL flight capability is a crucial step towards the validation of all flight modes. With CTOL trials complete, we will begin hovering trials and the flight trials will be concluded by transition between hovering flight and aerodynamic flight in both directions."

During the CTOL flight test (November 2020) the aircraft took off at a length of 250 metres, demonstrating a great potential for Short take-off and landing (STOL). Take-off and landing were smooth, and the vehicle maintained a comfortable cruise at a speed of (90 mph) airborne for over five minutes. Witnesses were amazed at just how quiet this aircraft was compared to a helicopter.

The flight tests included evaluations on aircraft flight dynamics, performance as well as handling qualities.  As the e-Starling adopts a semi blended wing body (BWB) design, it requires a low angle for take-off; it is important to understand when the aircraft is capable of taking-off and at which speed.
 
Apart from slow and fast taxiing on the runway as well as take-off and landing; the half scale demonstrator also performed banking manoeuvres in addition to tests on yaw, pitch and roll. The results show very stable in terms of handling quality.  
 
Among other tests of subsystems were brake, telemetry, redundancy links, and ensuring the centre of gravity (CG) of the aircraft is at the correct design place.
 
The aircraft’s performance matched the predicted calculations made during preliminary and detailed design stages.  

"The data provided by the flight tests were sufficient and invaluable for us to feed into fine tuning the aircraft for auto pilot to allow us to conduct a subsequent test on auto pilot mode," said one of the engineering crew on-site.

Advertisement
ODU RT

Why a CTOL test for a VTOL aircraft? The ability to take off and land conventionally is an important part of the safety justification for VTOL aircraft, a key safety contingency.

Samad’s Aircraft Design Adviser, Professor John Fielding explained: "Safety is key. We have investigated various safety challenges via CFD analysis and now through the flight tests using this 50% scaled CTOL prototype."

Samad Aerospace is a disruptive green-tech start-up based at the Cranfield Technology Park in the UK. The company’s engineers are pioneering the development of the world’s fastest hybrid-electric vertical take-off and landing (VTOL) aircraft set to revolutionise civil air transportation globally. Samad Aerospace is now listed in the top five e-VTOL start-ups worldwide  and is regarded as an essential and key contributor to the third aerospace revolution .

Samad Aerospace has been developing its unique manned and unmanned aircraft with two scaled prototypes (10% and 20%) successfully built, flown, and showcased in reputable international air shows such as Singapore, Geneva and Farnborough.

Preparations for the e-VTOL flight tests are already well underway and2021 will see the completion of the 50% e-VTOL version of the e-Starling.
 

Advertisement
Cranfield University
NATS powers up Prestwick with solar energy

Aerospace

NATS powers up Prestwick with solar energy

19 June 2025

Over 1,400 solar panels have been installed on the roof of Prestwick Air Traffic Control Centre, marking a significant milestone in NATS’ aim to be a net zero company by 2035.

Cranfield receives funding for green aerospace projects

Aerospace

Cranfield receives funding for green aerospace projects

19 June 2025

Cranfield University and its industry partners are receiving a share of £250 million in funding from the UK government to drive green aerospace projects.

Olsen to provide actuators for Britten-Norman’s Islander

Aerospace

Olsen to provide actuators for Britten-Norman’s Islander

19 June 2025

Olsen Actuators and Drives has announced that they will provide electro-mechanical actuators to aircraft designer and manufacturer Britten-Norman, for use on its renowned light utility aircraft

NCC set to anchor future wing capabilities for Europe

Aerospace

NCC set to anchor future wing capabilities for Europe

19 June 2025

NCC has been awarded a £15.8 million UK Government grant to develop its aerospace capabilities, to secure next generation wing manufacturing in Europe.

Advertisement
Gulfstream RT
Serco secures Dubai Airports contract extension

Aerospace Security

Serco secures Dubai Airports contract extension

18 June 2025

Serco has announced a significant contract extension with Dubai Airports, valued at AED 495 million (c.£100 million) and running until December 2030.

ZeroAvia and Loganair work towards zero-emission flights

Aerospace

ZeroAvia and Loganair work towards zero-emission flights

18 June 2025

ZeroAvia has signed a Memorandum of Understanding (MoU) with Loganair to work towards potential adoption of hydrogen-electric engines to support zero-emission flights.

Advertisement
ODU RT