in Aerospace

3DPRINTUK expands material and post processing capabilities

Posted 29 July 2020 · Add Comment

SLS 3D Printing company 3DPRINTUK, has expanded its material range to include flexible PEBA and has also introduced shot peening technology to enhance surface finish.



Above: PEBA Collection – Actual Size A. 50 mm x 50 mm x 16 mm / B. 13.5 mm x 13.5 mm x 41 mm / C. 102 mm x 102 mm x 40 mm.
Courtesy 3DPRINTUK


To date the company’s 3D printing services have been dedicated to the selective laser sintering (SLS) process, specifically with the PA2200 (nylon) material. Nick Allen, 3DPRINTUK’s CEO and founder explained how this was absolutely intentional: “Over the past decade, as we have grown the business organically and steadily, we were committed to developing the very best in-house process/material interface that would in turn ensure the best possible outcomes for our clients’ parts in terms of quality, consistency and repeatability.”

New Material
This approach has led to the 3DPRINTUK team becoming experts in their field, with a profound understanding of the SLS process,  and is now allowing them to apply their expertise into new areas, namely through the introduction of PrimePartST — a polyether block amide (PEBA) material — designated 2301 — from the thermoplastic elastomer (TPE) family of materials .

Allen said: “This is a big day for us. There were limiting factors in our previous facility that prevented us from adding new materials. Now with our new factory and with our in-house developed order management system, we look to introduce a number of new offerings, with PEBA being the first of these.”

PEBA 2301 exhibits flexible, rubber-like characteristics similar to TPU and other TPE’s, but it is slightly harder and stronger. PEBA 2301 also demonstrates good chemical resistance, water resistance, long term stability, with excellent detail resolution possible and rubber-like fatigue behaviour. The material comes in matt white, but PEBA parts can easily be dyed if the natural finish is not suitable for any application. One of the key properties of PEBA 2301 is obviously its rubber-like flexibility.

PrimePartST has a higher melting point than most resin-based elastomers, and is thus ideally suited to rugged end-use applications. It is also suited for batch production runs, and its elasticity makes it an ideal material for key functions, including anti-vibration and impact protection. Typical applications include air ducts, encapsulation components, handles, medical, seals and gaskets, and sports equipment and footwear.

Allen continued: “With everything we offer, we aim to be fully transparent. This new material is not perfect. To be fair, what material is? So understanding its limitations is as important as maximising its strengths.”

The extensive testing carried out on the PEBA 2301 material (and the insight garnered from it), means that the 3DPRINTUK team is now able to fully support clients with applications that require the flexible properties that this material offers. Understanding both material limitations and how to get the best from the machine / material interface is a hallmark of the high-quality service standard that 3DPRINTUK offers all of its clients.

New Finish
In addition to the PEBA 2301 introduction, 3DPRINTUK is now also offering a shot peening service for low, medium, and high volumes of parts, following investment in more hardware from DyeMansion in the form of the PowerShot S system, which utilises the proprietary PolyShot Surfacing (PSS) process.

The PSS process involves the plastic surfaces of parts being impacted — or shot — with a stream of particles, under considerable force using compressed air. This action results in a smoother, matt-glossy finish with improved scratch resistance. Significantly, no material is removed from the printed parts during the process, ensuring that tolerances are not affected while the surface quality of the part is greatly improved.

3D printed parts of virtually any geometry are compatible with the PowerShot S, including parts that incorporate fine features and intricate detailing. Used for standalone finished parts, the PSS process is of particular importance if additional post processing steps — such as colouring / dyeing — are required. The more homogenous surface produced by PSS ensures dyes penetrate uniformly to produce a consistent and high-quality result. 

The PowerShot S system can boost efficiency and productivity of end use parts considerably. With a cycle time of just 10 minutes for a medium sized batch of mid-sized 3D printed components — compared with traditional tumbling techniques that can take 6+ hours — the results can be highly cost-effective both in terms of the functionality and the life-cycle of parts themselves.

Allen commented: “At 3DPRINT UK we have honed and optimized the SLS 3D printing process over many years to achieve the best possible results off our machines for a wide range of relevant applications, that continue to grow in scope. However, the post processing of parts — from cleaning through to further optimised surface finishes — has always been a necessity for many of our clients. Expanding our post processing capabilities is a vital part of the business, and the DyeMansion PowerShot S system is an important next step in our expansion, enabling us to offer our many and varied clients the benefits of shot peened 3D printed parts from a single source.”

 

* required field

Post a comment

Other Stories
Advertisement
Latest News

Future Combat Air continues to drive economic advance across the UK

Seven companies representing the breadth of innovation across the UK have signed agreements to progress opportunities to work on future combat air concepts and underpinning technologies across Team Tempest.

BAE Systems and WAE partner on fast jet development

BAE Systems and Williams Advanced Engineering (WAE) have joined forces to explore how battery management and cooling technologies from the motorsport industry could be exploited to deliver efficiency and performance gains in the

CFMS study bolsters business case for regional electric aircraft

A new study from the Centre for Modelling & Simulation (CFMS), a not-for-profit specialist in digital engineering, has helped the aerospace industry move a step closer to the development of regional electric aircraft.

Horizon Technologies awarded Transformational Xtender SIGINT Technology Patent

Horizon Technologies was issued a patent (US 10,727,932 B2) by the United States Patent and Trademark Office (USPTO) on 28th July 2020, covering the company's fundamental Xtender technology, which allows the smallest UAVs and

BA's August schedule returns to more destinations

Throughout August, British Airways is resuming flying to more destinations, albeit with continued low frequencies while the impact of Covid-19 is still being felt across the globe.

Element and FRISA strengthen relationship with expanded LTA

Element Materials Technology (Element) has been awarded an expansion to the scope of its existing 10-year long term agreement (LTA) with FRISA to include all three of FRISA’s major business units: Aerospace, Force VG, Forge SC and

Getac SK2606280920
See us at
DVD 2020