Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Space
  • /
  • NASA's Orion with Airbus-built ESM ready for launch

Space

NASA's Orion with Airbus-built ESM ready for launch

NASA's Orion spacecraft will be launched in a few days from Kennedy Space Center in Florida, USA, on its mission to the Moon, with the Airbus-built European Service Module (ESM) which will power Orion to and from its lunar orbit as part of NASA’s Artemis missions.

Above: Artemis I stack rolls out to the launch pad.
Photo: NASA/Radislav Sinyak

Airbus has developed the ESM as prime contractor for the European Space Agency ESA and is designing and manufacturing a further five ESMs.

The ESM is a key element of Orion, the next-generation spacecraft that will carry astronauts beyond low Earth orbit for the first time since the Apollo programme ended in the 1970s. The module provides propulsion, power and thermal regulation and will supply astronauts with water and oxygen on future missions. The ESM is installed below the crew module. Together, the two make up the Orion spacecraft.

Advertisement
ODU RT

"The launch of NASA's Orion spacecraft with the European Service Module has historic significance 50 years after the last astronaut lunar mission and is another major step toward returning astronauts to the Moon. The programme is now moving forward and we are ready for a return to the lunar surface in 2025 together with our customers ESA and NASA and our industrial partner Lockheed Martin Space," said Jean-Marc Nasr, head of Space Systems at Airbus.

The launch of the first Orion spacecraft using NASA's new ‘Space-Launch System’ rocket will be crewless and will take Orion more than 70,000 kilometres beyond the Moon to demonstrate its capabilities. Artemis II, planned for around 2024 and powered by the ESM-2, will carry four astronauts to space and return them safely to Earth. Then, a year later, the ESM-3 will ensure that another Orion capsule safely carries the first woman to the Moon. The technologies developed and experience collected during the Artemis Missions will be fundamental for possible future long-term missions to Mars, for example.

The ESM consists of more than 20,000 parts and components, from electrical equipment to thrusters, solar arrays, propellant tanks, life support materials and several kilometres of cables and hoses.

The ESM is a cylinder about four metres high and wide. It is similar to the European Automated Transfer Vehicle (ATV 2008 - 2015), also built by Airbus, and features the signature four-bladed solar array (19 metres in diameter when deployed), which generates enough power for two households. The service module's 8.6 tons of propellant power the main engine, eight auxiliary engines and 24 smaller thrusters ensure navigation and attitude control.

Advertisement
Leonardo RT

At launch, the ESM weighs a total of just over 13 tons. In addition to serving as the main propulsion system for the Orion spacecraft, the ESM will enable orbital manoeuvring and attitude control. It will provide the crew with key life support elements such as water and oxygen and regulate thermal control while docked to the crew module. Also the unpressurized service module can be used to carry additional payloads.

For the first landing on the Moon, the Orion spacecraft will dock with the international Lunar Gateway - a lunar-orbiting platform that will enable sustained space exploration and expand humanity's presence in space.

 

Advertisement
Babcock LB
Expleo’s science-based climate action targets approved by SBTi

Aerospace Defence Space

Expleo’s science-based climate action targets approved by SBTi

27 June 2025

Expleo's near and long-term science-based emissions reduction targets have been validated by the Science Based Targets initiative (SBTi).

Serco launches Net Zero Standard for suppliers

Aerospace Defence Security Space

Serco launches Net Zero Standard for suppliers

25 June 2025

Serco has today launched a new Net Zero Standard for its suppliers, demonstrating its commitment to sustainable procurement and to partnering with its suppliers to reach Net Zero emissions by 2050 or sooner.

Five projects to use satellite data to drive public services

Space

Five projects to use satellite data to drive public services

24 June 2025

Five projects from across the UK will use satellite data to help transform the delivery of public services, thanks to new funding from the UK Space Agency.

CGI to deliver core ground segment for ESA

Space

CGI to deliver core ground segment for ESA's TRUTHS satellite mission

24 June 2025

CGI as been selected as the provider of the Payload Data Ground Segment (PDGS) for the European Space Agency’s (ESA) TRUTHS mission, a pioneering Earth Observation satellite designed to enhance global climate monitoring and enable cross-calibration of EO missions.

Advertisement
DSEI 2025
Safran and Babcock advance Franco-British defence collaboration at Paris Air Show

Defence Space Events

Safran and Babcock advance Franco-British defence collaboration at Paris Air Show

18 June 2025

Safran Electronics & Defense and Babcock International Group, have announced plans to increase collaboration across multidomain mission systems, aircraft engines, space systems, tactical and strategic communications.

Astroscale awarded £5.15m contract for Orpheus mission

Defence Security Space

Astroscale awarded £5.15m contract for Orpheus mission

16 June 2025

Astroscale Ltd has been awarded a contract worth £5.15 million by the UK’s Defence Science and Technology Laboratory (Dstl), via BAE Systems as the Dstl Serapis Framework lead.

Advertisement
Leonardo RT