Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Defence
  • /
  • Allen-Vanguard and Metis Aerospace to deliver advanced counter-drone capabilities

Defence Security

Allen-Vanguard and Metis Aerospace to deliver advanced counter-drone capabilities

Allen-Vanguard, a provider of customised solutions for defeating Radio Frequency (RF) based terrorist and extremist threats, has entered a strategic collaboration with domain knowledge experts in passive RF detection, Metis Aerospace.

Above: Tony Burnell (CEO Metis Aerospace) and Bobby Strawbridge (President Allen-Vanguard).
Courtesy Allen-Vanguard

This collaboration has been established to leverage their respective expertise and proven products to address the growing requirement for a highly mobile counter unmanned air system (C-UAS) capability that delivers a tried and tested baseline capability to detect and defeat an increasing range of threats posed by the nefarious use of drones.  

Advertisement
ODU RT

Both Allen-Vanguard and Metis Aerospace will be at the Specialist Defence and Security Convention (SDSC) on 18th-20th November 2024 at Telford International Centre, UK to discuss this collaboration and their respective range of existing products and capabilities.
Metis has extensive experience in the RF detect domain, with several products that are already the cornerstone of many larger protection systems across a wide range of sectors.  

For over 10 years, they have been at the forefront of C-UAS detection capability development, advising the MoD and receiving research funding to develop their innovative technologies, such as SKYPERION. Allen-Vanguard is equally an operationally proven subject matter expert in defeating RF threats, including cutting-edge counter-drone solutions, like ANCILE, that are used by militaries, security forces and NGOs globally to protect their personnel and key assets.

Advertisement
ODU RT

In an era where drone technology is rapidly evolving, and how drones are being employed on the battlefield is going through an unprecedented revolution, the Allen-Vanguard and Metis collaboration combines their respective ground-breaking and innovative technologies to provide the necessary expertise, agility and technology to properly mitigate this threat. The operationally proven strengths of both companies can be brought to bear on the key subset of the C-UAS market that is demanding increased manoeuvrability and effectiveness at a practical price point. In addition, both companies have built a reputation for enduring customer support to ensure deployed systems are maintained with the latest detection and defeat waveforms as the RF battlespace evolves.
 
Tony Burnell, CEO of Metis Aerospace said: “We are very excited to be collaborating with Allen-Vanguard to develop this capability that we see meets a growing market demand. It makes perfect sense for us to work together and exploit our expertise in the detect function and then fully synchronise and integrate with an Allen-Vanguard defeat capability. This combination will be a real protection benefit for all our customers.”
 
Bobby Strawbridge, President of Allen-Vanguard said: “I am delighted to announce this collaboration with Metis that, as fellow SME domain knowledge experts, perfectly complements our own portfolio of products. The ability to combine the detect and defeat functions into one capability will undoubtedly deliver enhanced C-UAS capabilities to better counter modern hostile drone operations.

“We are also pursuing a number of qualified opportunities in the Middle East and Eastern Europe from users who have reached out, seeking a cost-effective and efficient system for a baseline, mobile C-UAS capability. The strength of Metis’ portfolio of offerings also has applicability to domestic and international requirements outside the scope of C-UAS and we’re actively engaged in exploring these exciting opportunities.”

Advertisement
General Atomics LB
Dstl backed robotics advance transforms military manufacturing

Defence

Dstl backed robotics advance transforms military manufacturing

15 May 2026

Rivelin Robotics, supported by Defence Science and Technology Laboratory (Dstl) expertise, has created microfactory technology that automates the slow, risky manual finishing of 3D printed parts.

Defence firms incentivised to deliver on time

Defence

Defence firms incentivised to deliver on time

15 May 2026

The UK Government is cracking down on waste and delays as defence companies are to be incentivised to deliver equipment on time and on budget with new reforms to Single Source Contract Regulations.

MoD selects TEKEVER to support Project NYX

Defence

MoD selects TEKEVER to support Project NYX

15 May 2026

TEKEVER has been selected by the UK Ministry of Defence (MoD) to support Project NYX, the British Army’s programme to develop next-generation autonomous systems capable of operating alongside Apache attack helicopters.

West Midlands launches MoD-backed RDSC

Defence

West Midlands launches MoD-backed RDSC

15 May 2026

A new Regional Defence and Security Cluster (RDSC), designed to align local defence capabilities with UK demand, has been launched in the West Midlands.

Advertisement
ODU RT
Getac to demo integrated tactical solutions at SOF Week 2026

Defence Security Events

Getac to demo integrated tactical solutions at SOF Week 2026

15 May 2026

Getac, a provider of rugged computing and mobile video solutions and a manufacturer with advanced in-house capabilities, will demo its portfolio of rugged laptops, tablets and command solutions at SOF Week 2026, 18th-21st May in Tampa, Florida.

GA-ASI and USAF Demonstrate APKWS on MQ-9A Reaper

Defence

GA-ASI and USAF Demonstrate APKWS on MQ-9A Reaper

15 May 2026

General Atomics Aeronautical Systems, Inc. (GA-ASI), in collaboration with the US Air Force (USAF), has conducted flight tests of an Advanced Precision Kill Weapon System (APKWS) using a USAF MQ-9A Reaper Remotely Piloted Aircraft. MQ-9A is produced by GA-ASI.

Advertisement
ODU RT
Advertisement
FIA2026 animated banner