Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Aerospace
  • /
  • IATA urges adoption of digitalisation for efficient restart

Aerospace

IATA urges adoption of digitalisation for efficient restart

The International Air Transport Association (IATA) has warned of potential airport chaos unless governments move quickly to adopt digital processes to manage travel health credentials (COVID-19 testing and vaccine certificates) and other COVID-19 measures.

Image courtesy IATA

IATA says the impacts will be severe:

  • Pre-COVID-19, passengers, on average, spent about 1.5 hours in travel processes for every journey (check-in, security, border control, customs, and baggage claim).
  • Current data indicates that airport processing times have ballooned to 3.0 hours during peak time with travel volumes at only about 30% of pre-COVID-19 levels. The greatest increases are at check-in and border control (emigration and immigration) where travel health credentials are being checked mainly as paper documents.
  • Modeling suggests that, without process improvements, the time spent in airport processes could reach 5.5 hours per trip at 75% pre-COVID-19 traffic levels, and 8.0 hours per trip at 100% pre-COVID-19 traffic levels.

Willie Walsh (above), IATA’s Director General.“Without an automated solution for COVID-19 checks, we can see the potential for significant airport disruptions on the horizon. Already, average passenger processing and waiting times have doubled from what they were pre-crisis during peak time—reaching an unacceptable three hours. And that is with many airports deploying pre-crisis level staffing for a small fraction of pre-crisis volumes.

Advertisement
Security & Policing Rectangle

"Nobody will tolerate waiting hours at check-in or for border formalities. We must automate the checking of vaccine and test certificates before traffic ramps up. The technical solutions exist. But governments must agree digital certificate standards and align processes to accept them. And they must act fast.”

Over the past two decades, air travel has been reinvented to put passengers in control of their journeys through self-service processes. This enables travelers to arrive at the airport essentially 'ready to fly'. And with digital identity technology, border control processes are also increasingly self-service using e-gates. Paper-based COVID-19 document check would force travellers back to manual check-in and border control processes that are already struggling even with low volumes of travellers.

If Governments require COVID-19 health credentials for travel, integrating them into already automated processes is the solution for a smooth restart.  This would need globally recognised, standardised and interoperable digital certificates for COVID-19 testing and vaccine certificates.

Digitalised certificates have several advantages:

  • Avoiding fraudulent documentation
  • Enabling advance “ready-to-fly” checks by governments
  • Reducing queuing, crowding and waiting time in airports through integration with self-service check-in (via the internet, kiosks or mobile phone apps)
  • Increasing security through integration with digital identity management being used by border control authorities
  • Reducing the risk of f virus transmission via the person-to-person exchange of paper documents

The G20 has identified a similar solution. The G20 Rome Guidelines for the Future of Tourism call for a common international approach on COVID-19 testing, vaccination, certification, and information as well as promoting digital traveler identity.

Advertisement
ODU RT

The G7 discussions, which commence on 11 June, are the next opportunity for leading governments to develop a solution around four key actions by agreeing to:

  1. Issue vaccination certificates based on World Health Organisation (WHO) Smart Vaccine Certificate data standards including QR codes
  2. Issue COVID-19 test certificates in accordance with the data requirements set out by the International Civil Aviation Organisation (ICAO)
  3. Accept digital COVID-19 test and vaccine certificates at their borders
  4. Where governments require airlines to check travel credentials, governments should accept traveler friendly apps, such as the IATA Travel Pass, to efficiently facilitate the process

“This cannot wait. More and more people are being vaccinated. More borders are opening. Booking patterns tell us that pent-up demand is at extremely high levels. But governments and the competent authorities are acting in isolation and moving far too slowly. A smooth restart is still possible. But governments need to understand the urgency and act fast,” said Walsh.

IATA asks the G7 to work with the air transport industry to take leadership in restarting the global travel sector. It says by engaging with the air transport industry, we can ensure that government requirements for safe travel are met with solutions that can be efficiently operationalised.

“A good first step would be G7 agreement, with industry input, on a common set of COVID-19 travel requirements. The next step would be implementing and mutually recognising those requirements. If the G7 took these leadership measures , the freedom to travel could be seamlessly restored for about a third of all journeys. Other countries could build on that leadership for a safe and efficient global restart of connectivity,” said Walsh.

 

 

Advertisement
General Atomics LB
Britten-Norman appoints Richard Milne as COO

Aerospace

Britten-Norman appoints Richard Milne as COO

5 November 2025

British aircraft manufacturer, Britten-Norman, has appointed Richard Milne as its Chief Operating Officer (COO).

Enterprise Control Systems launches ECS Connect

Aerospace Defence Security

Enterprise Control Systems launches ECS Connect

5 November 2025

Radio frequency (RF) technology specialist Enterprise Control Systems (ECS), part of SPX Communication Technologies, today announced the launch of ECS Connect.

Tekever and Arkeus integrate Warden hyperspectral sensor

Aerospace Defence Security

Tekever and Arkeus integrate Warden hyperspectral sensor

5 November 2025

Tekever and Arkeus have successfully completed a joint integration and flight test campaign, proving the full compatibility and mission-readiness of Tekever’s AR3 EVO tactical unmanned aerial system and Arkeus’ Warden Hyperspectral Optical Radar (HSOR).

Wayland Additive to showcase NeuBeam tech at Formnext

Aerospace Defence Events

Wayland Additive to showcase NeuBeam tech at Formnext

4 November 2025

Wayland Additive, a specialist in eBeam metal Additive Manufacturing (AM) technologies, is returning to Formnext (taking place 18th–21st November 2025 in Frankfurt, Germany) where it will be showcasing its NeuBeam technology.

Advertisement
Security & Policing Rectangle
Tech challenge launched to counter drone threats in prisons

Aerospace Security

Tech challenge launched to counter drone threats in prisons

4 November 2025

A new innovation challenge aimed at combatting the growing threat of drones to prisons has been launched by the Ministry of Justice through His Majesty's Government Communications Centre Co-Creation.

ATI Programme funds first projects to address non-CO2 aircraft emissions

Aerospace

ATI Programme funds first projects to address non-CO2 aircraft emissions

4 November 2025

The Aerospace Technology Institute (ATI) today announced funding for the first three projects under its Non-CO2 Programme.

Advertisement
ODU RT