Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Aerospace
  • /
  • ICCT study confirms viability of hydrogen-powered aircraft for short-haul aviation

Aerospace

ICCT study confirms viability of hydrogen-powered aircraft for short-haul aviation

The International Council on Clean Transportation (ICCT) has published a new study which finds that hydrogen-powered aircraft could cap emissions from passenger aviation with policy support and 'look surprisingly viable from a design perspective'.

Above: Cranfield Aerospace Solutions is developing its hydrogen fuel cell propulsion system for an existing nine-seat Britten-Norman Islander aircraft, which is planned to be flying by 2023 and is now working with easyJet to understand how the adoption of zero-carbon technologies could integrate with an airline operations for future introduction of the technology.
Courtesy Cranfield Aerospace Solutions (CAeS)

Advertisement
ODU RT 2

According to the ICCT white paper - Performance analysis of evolutionary hydrogen-powered aircraft - liquid hydrogen combustion aircraft could provide carbon-free air travel on up to a third of global passenger demand starting in 2035. The study outlines that aircraft burning 'green hydrogen' produced from renewable energy could enable flights up to 3400 km at reduced fuel costs compared to sustainable aviation fuel.

EasyJet is advocating for the use of hydrogen in short-haul aviation to eliminate carbon emissions. In November, the airline joined Race to Zero, a global UN-backed campaign to achieve net-zero carbon emissions by 2050. In order to achieve this goal, technology for carbon-free flying, such as hydrogen, will play a key role.

The airline fully supports the ICCT’s conclusion that “significant government support will be needed to make hydrogen aircraft work” and that “they deserve a level playing field along with ‘drop-in’ sustainable aviation fuels, which remain scarce and expensive.”

EasyJet has been urging industry and government collaboration to develop policies to promote the development of hydrogen-powered aircraft as well as the required technology, infrastructure and green hydrogen production.

Advertisement
ODU RT 2

Johan Lundgren, CEO of easyJet, said: “We welcome the findings of this important report by the ICCT, which shows that carbon-free flight is possible over shorter ranges, something we have long argued. Hydrogen is an opportunity for British and European aviation, so we continue to urge governments to quickly put incentives in place to support it, develop regional hydrogen infrastructure, and level the playing field with sustainable aviation fuels."

Championing the development of a carbon-free aircraft to decarbonise aviation has long been a focus for easyJet and the airline is working with partners across the industry, including Airbus, Rolls-Royce, Cranfield Aerospace Solutions and Wright Electric, to accelerate the development of zero carbon emission technologies and the required infrastructure. The airline is optimistic that it could begin flying customers on carbon-free planes from the mid-2030s.

Meanwhile, easyJet is the only major airline in Europe to offset the carbon emissions from the fuel used for all its flights. This comes at no additional cost to its customers and the airline only supports projects that are certified by either Gold Standard or Verified Carbon Standard. These projects reduce or remove carbon in the atmosphere. This is not a long-term solution, but we believe it currently represents the best way to compensate for the impact of the carbon emitted from flying, until new technologies such as hydrogen and sustainable aviation fuels become widely available.

Beyond carbon, easyJet is focusing on reducing waste within its wider operations and the supply chain as well as reducing plastic. By then end of 2021 more than 36 million single-use plastic items were eliminated from inflight operations. The airline also recently introduced new crew uniforms made from recycled plastic bottles. With 45 bottles in each uniform this has the potential to prevent 2.7 million plastic bottles from ending up in landfill or in oceans over the next five years.
 

Advertisement
L3Harris L3Harris
Roke opens Gloucester office

Aerospace Defence Security

Roke opens Gloucester office

19 April 2024

Romsey headquartered technology company Roke, has today officially opened its new bespoke office space in Gloucester, as it focuses on further expansion, innovation and technological growth in the area and for the UK.

EDGE secures project management contracts at Leeds Bradford and Luton airports

Aerospace

EDGE secures project management contracts at Leeds Bradford and Luton airports

19 April 2024

Multidisciplinary property and construction consultancy EDGE has secured a new project for Leeds Bradford Airport (LBA) and the re-appointment to London Luton Airport’s (LLA) project management framework.

First disability flying lessons launched from Kent airport

Aerospace

First disability flying lessons launched from Kent airport

19 April 2024

The UK’s disabled flying charity Aerobility has partnered with Lydd Aero Club in Kent to provide opportunities for lessons and experience flights for people living with disabilities.

Crestline invests in 2Excel

Aerospace

Crestline invests in 2Excel

18 April 2024

Aviation and engineering company 2Excel Group has completed a growth capital and refinancing transaction with the backing of new capital partner Crestline, to pursue its ambitious growth strategy.

Advertisement
ODU RT 2
Skyports secures investment from ACS Group

Aerospace

Skyports secures investment from ACS Group

18 April 2024

Skyports has announced that infrastructure and construction company ACS Group, has made a substantial equity investment in Skyports, to become the largest investor in the company.

SDE Technology leads development of superplastic forming process

Aerospace

SDE Technology leads development of superplastic forming process

18 April 2024

Shropshire-based lightweight engineering SME, SDE Technology, is leading an initiative to develop a new superplastic forming process, with the new hybrid manufacturing method potentially boosting manufacturing efficiency and capability in the UK for key aerospace components, that global manufacturers' use in aircraft production.

Advertisement
Marshall RT