Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Aerospace
  • /
  • Qatar Airways takes delivery of three Airbus A350-1000

Aerospace

Qatar Airways takes delivery of three Airbus A350-1000

Qatar Airways today took delivery of three more Airbus A350-1000 aircraft, reaffirming its position as the largest operator of Airbus A350 aircraft with 52 in its fleet.


Image courtesy Qatar Airways

All three A350-1000 are fitted with the airline’s multi award-winning Business Class seat, Qsuite and will operate on strategic long-haul routes to Africa, the Americas, Asia-Pacific and Europe.

Qatar Airways Group Chief Executive, His Excellency Mr. Akbar Al Baker, said: “Qatar Airways is one of the few global airlines to have never stopped flying throughout this crisis. As one of the only airlines to continue taking delivery of new aircraft at this time, our strategic investment in modern, fuel-efficient twin-engine aircraft has enabled us to continue flying taking over 2.3 million people home on more than 37,000 flights since the start of the pandemic. Due to COVID-19’s impact on travel demand, we will continue to fly greener and smarter by keeping our fleet of Airbus A380 grounded, as it is not commercially or environmentally justifiable to operate such a large aircraft in the current market.

Advertisement
PTC rectangle

“Environmentally conscious passengers can travel with the reassurance that Qatar Airways continuously monitors the market to assess both passenger and cargo demand to ensure it operates the most efficient aircraft on each route. Rather than being forced to fly oversized aircraft due to limited aircraft options, reducing the flexibility for passengers to travel when they want, Qatar Airways has a variety of sustainable aircraft it can choose from to offer more flights with the right capacity in each market. Passengers can also rely on our airline operate an honest schedule of flights with our mixed fleet giving us the ability to maintain services, and upgrade or downgrade aircraft size depending on passenger demand.”

The airline’s internal benchmark compared the A380 to the A350 on routes from Doha to London, Guangzhou, Frankfurt, Paris, Melbourne, Sydney and New York. On a typical one-way flight, the airline found the A350 aircraft saved a minimum of 16 tonnes of carbon dioxide per block hour compared to the A380. The analysis found that the A380 emitted over 80% more CO2 per block hour than the A350 on each of these routes. In the cases of Melbourne and New York the A380 emitted 95% more CO2 per block hour with the A350 saving around 20 tonnes of CO2 per block hour. Until passenger demand recovers to appropriate levels, Qatar Airways will continue to keep its A380 aircraft grounded, ensuring it only operates commercially and environmentally responsible aircraft.

Qatar Airways’ onboard safety measures for passengers and cabin crew include the provision of Personal Protective Equipment (PPE) for cabin crew and a complimentary protective kit and disposable face shields for passengers. Business Class passengers on aircraft equipped with Qsuite can enjoy the enhanced privacy this award-winning business seat provides, including sliding privacy partitions and the option to use a ‘Do Not Disturb (DND)’ indicator. Qsuite is available on flights to more than 30 destinations including Frankfurt, Kuala Lumpur, London and New York. For full details of all the measures that have been implemented onboard and in HIA, please visit qatarairways.com/safety.

Qatar Airways operations are not dependent on any specific aircraft type. The airline’s variety of modern fuel-efficient aircraft has meant it can continue flying by offering the right capacity in each market. Due to COVID-19’s impact on travel demand, the airline has taken the decision to ground its fleet of Airbus A380s as it is not commercially or environmentally justifiable to operate such a large aircraft in the current market. The airline’s fleet of 52 Airbus A350 and 30 Boeing 787 are used for the most strategically important long-haul routes to Africa, the Americas, Europe and Asia-Pacific regions.

Advertisement
Security & Policing Rectangle

Qatar Airways’ home and hub, Hamad International Airport (HIA), has implemented stringent cleaning procedures and applied social distancing measures throughout its terminals. Passenger touchpoints are sanitised every 10-15 minutes and boarding gates and bus gate counters are cleaned after each flight. In addition, hand sanitisers are provided at immigration and security screening points.

 

Advertisement
ECS leaderboard banner
UK hydrogen airport trial sets out roadmap for further studies

Aerospace

UK hydrogen airport trial sets out roadmap for further studies

18 February 2026

A new report into the UK’s first airside trial of multiple hydrogen-powered ground support equipment (GSE) has confirmed that hydrogen can be safely and effectively integrated into airport ground operations, whilst setting out a series of essential next steps needed to accelerate hydrogen adoption and decarbonisation across the aviation sector.

Kent collaborates on Pre-FEED study for Eq.flight SAF demo plant

Aerospace

Kent collaborates on Pre-FEED study for Eq.flight SAF demo plant

18 February 2026

Integrated energy services partner, Kent, has collaborated with Equilibrion during a successful bid for funding from the UK Department for Transport’s Advanced Fuels Fund (AFF) and with that funding for Equilibrion and its partners, Kent is delivering the Pre-Front-End Engineering Design (Pre-FEED) for Eq.flight, an advanced power-to-liquids ...

TEKEVER launches UAS Training School at West Wales Airport

Aerospace

TEKEVER launches UAS Training School at West Wales Airport

18 February 2026

Today, provider of AI-centred uncrewed aerial systems, TEKEVER, has announced the official opening of its new Training School at West Wales Airport.

UK

Aerospace

UK's January air traffic soars into 2026

17 February 2026

January’s UK air traffic increased by 1,725 flights in 2026 versus the previous year, equivalent to a 1% uptick in flights flying in UK airspace.

Advertisement
ODU RT
Responsive Engineering unveils apprentice-built Welding Academy

Aerospace

Responsive Engineering unveils apprentice-built Welding Academy

17 February 2026

Responsive Engineering, the daughter company of Pearson Engineering, marked National Apprenticeship Week with the unveiling of its new Welding Academy, a unique training space built almost entirely by its apprentices using repurposed and recycled materials.

UK pioneers 3D printing of aircraft parts using recycled titanium

Aerospace Defence

UK pioneers 3D printing of aircraft parts using recycled titanium

17 February 2026

QinetiQ, in partnership with Additive Manufacturing Solutions Limited (AMS Ltd.), has completed the maiden flight of an aircraft containing a 3D printed structural component, made from recycled titanium.

Advertisement
PTC rectangle
Advertisement
ECS leaderboard banner